DRV050-VGA-R01 is an RGB graphics signals input driver board for SVGA050 OLED microdisplay. The low power consumption decoder can converts RGB graphics signals into digital RGB 4:4:4 component video data compatible with the 24-bit ITU-R BT.601 interface standard. The driver board supports EDID identification and default setting is 800x600@60Hz.
The display center is accord to the driver PCB center, convenient for design and set up optical system.
The two digital input pins allow user to adjust the brightness and contrast of the display. One CMOS standard serial communication interface allow user to configure all register of decoder and display. So user can re-configure the driver board flexible.
Low-noise, high efficiency DC-DC convertors can support 5.5V~17V wide power supply.
RGB graphics signals
Low power consumption
Industrial temperature grade
5.5V-17V wide power supply
|Dimension||31mm × 31mm||Input Standard||RGB graphics signals|
|Output Standard||Digital 24Bit RGB 4:4:4||Interface||VGA / RS232 / 2DI|
|Operating Temperature||-40℃ ~ +65℃||Video Signal Interface||ITU-R BT.601|
|I/O Interface||CMOS Standard||Typical Power Consumption||< 700mW(Include display)|